Our structural operating room ceiling system is designed and engineered to meet the increased demands of today’s surgical areas. This complete, heavy-duty system can accommodate a wide range of suspended equipment and include all necessary lighting. AJ Manufacturing will work with you to customize a design that delivers an efficient and seamlessly integrated operating room that meets your exact needs.
The SSLORS is a modular, customizable air distribution and lighting solution specifically engineered to provide the clean air and high-quality lighting needed to meet today’s operating room needs, while making the best use of the limited ceiling space often found in surgical areas.
The Portable Reverse Flow unit can be plugged into a standard electrical wall outlet and placed anywhere on the floor of the isolation room. It draws air in, then exhausts HEPA filtered air out through ductwork connected to a room exhaust, return grille, adjacent space or through a window. Openings for ductwork must be sealed to prevent leakage and maintain room pressurization. The unit features a push/pull handle and swivel casters for easy movement.
THD-1500 Suspended Grid System is a customizable ceiling, lighting and air distribution system that’s specially designed and engineered for hospital surgical suites.
Reverse flow fan powered filter for filtration of exhaust. Common applications are workspaces involved with hazardous materials where exhausted air may cause a health or environmental threat. Common in medical facilities with potential airborne pathogens and used in facilities testing, packaging, and preparing fine powders that can create airborne health hazards.
AJ Manufacturing slide damper can be factory attached to most grilles for manual airflow adjustments. The slide damper is mechanically attached to the panel to provide airflow control. The design of the damper means it will fit into most existing applications.
The 550 LTA Series Long Throw Return Air Grille is styled to match the 150 and 250 Supply Grilles. The face bars are non-adjustable and available in either a horizontal position (H) or vertical position (V).
The 250LT Series Long Throw Double Deflection Supply Grille provides effective directional control of large volumes of air flow.
The 150 LT Long Throw Supply Grille provides effective directional control of large volumes of air flow. Custom sizes available.
For permanent installations, our ceiling-mounted FFU offers the industry’s highest output of up to 1200 CFM.
ALFG Aluminum Louvered Filter Grille
A550 FG Fixed Airfoil Blade Filter Grille
The APFG Aluminum Perforated Filter Grille.
AECFG Series Aluminum Egg Crate Lattice Filter Grille.
The AEC Series Aluminum Egg Crate Lattice Return Air Grille.
The AG (Horizontal or Vertical) Series Aluminum Return Grille.
The A550 (Horizontal or Vertical) Fixed Blade Single Deflection Return Grille
The 250 (Horizontal or Vertical) Double Deflection Supply Grille.
The A-150 (Horizontal or Vertical) Single Deflection Supply Grille.
ALBG – Aluminum Linear Bar Grille
The A-44 Series Aluminum Opposed Blade Damper.
A700 No-Vision Inverted Y Door & Partition Grille.
The A700 Aluminum No-Vision Door & Partition Grille is constructed from (.050) 6061 T-5 etched and clear anodized aluminum extrusions.
The 75 No-Vision No-Light Door & Partition Grille.
The 700 Steel No-Vision Door & Partition Grille is constructed with 24-gauge CRS hemmed louver blades that add strength and a smooth, burr-free louver design.
The 1900 Operable Door Grille is U.L. listed and fire rated for use in 1 3/4″ thick doors rated up to 90 minutes. The 160º fusible link overrides the manual operator when activated by heat.
The SSG Return Air Grille with Auxilliary Frame Series is a non-adjustable door grille made with louvered blades for limited vision in wood or hollow metal doors. Fits 1 3/8″ and 1 3/4″ thick doors. Blades are reinforced from the rear on approximate 12″ centers.
©2021 A-J Manufacturing All rights reserved
